HP Storage Platform Firmware Management Tool for StoreAll User Guide

Device :NIC
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP Embedded Network Adapter using
CP018942.scexe: the firmware version (BC:1.34;PXE:16.0.4) is already
up to date for device. However, you may still force the install of
the firmware by specifying the option '--force'.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :PCIeNIC
Status :Flash Not Attempted
Code :0x1032
INFORMATION :Flash not attempted. There is no firmware update available for HP
PCIe Network Adapter.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :Storage_Ctlr
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP SAS Storage Controller using
Defender212_Invader_2013111801_opt.bin: the firmware version (2.12
2013111801) is already up to date for device. However, you may still
force the install of the firmware by specifying the option '--force'.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :SERVER_HDD
Status :Flash Not Attempted
Code :0x1037
ERROR :Flash not attempted for HP DL Server HDD using CP021542.scexe: Smart
Array Controller Cache Board is not present. Cache board is needed to
flash the HDD.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
SUMMARY:
----------------------------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
----------------------------------------------------------------------------------------------------
ILO4 Integrated Lights-Out (iLO) 4 No Flash Not Attempted
BIOS BIOS Yes Success (Reboot Pending)
Power_Mgmt_Ctlr Power Management Controller No Flash Not Attempted
Smart_Array_Ctlr HP Embedded Smart Array No Flash Not Attempted
Controller
NIC HP Embedded Network Adapter No Flash Not Attempted
PCIeNIC HP PCIe Network Adapter No Flash Not Attempted
Storage_Ctlr HP SAS Storage Controller No Flash Not Attempted
SERVER_HDD HP DL Server HDD No Flash Not Attempted
----------------------------------------------------------------------------------------------------
3. Reboot node 1 and wait for it to completely power up.
4. Fail over to node 1. See “Failing a server over manually” in the Administrator Guide for your
platform.
5. On node 2, run hpsp_fmt –f server.
6. Reboot node 2 and wait for it to completely power up.
7. Fail back to node 2. See “Failing back a server” in the Administrator Guide for your platform.
If you have to downgrade the storage controller firmware as part of a downgrade of all server
firmware, complete the following steps:
1. On node 1, run hpsp_fmt –f server.
2. On node 2, run hpsp_fmt –f server.
3. Reboot node 1 and node 2 together and wait for each node to completely power up.
32 StoreAll 8800 and 8200 FMT command reference and examples