HP Storage Platform Firmware Management Tool for StoreAll User Guide
***WARNING***
- While flashing SERVER_HDD, the smart-component might also flash some of the Enclosure_HDD drive models if
supported by the same smart-component.
- And also, while flashing Enclosure_HDD, the smart-component might also flash some of the SERVER_HDD drive
models
if supported by the same smart-component.
Please confirm you have read all the above warning messages and taken necessary actions (Y/N)?y
Do you want to proceed (Y/N)?y
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Not attempted >>>
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Not attempted >>>
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Not attempted >>>
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Succeeded >>>
----------------------------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP Storage Enclosure Hard Disk Drives using
CP019804.scexe: the firmware version (HPD7) is already up to date for
device. However, you may still force the install of the firmware by
specifying the option '--force'.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP Storage Enclosure Hard Disk Drives using
CP018833.scexe: the firmware version (HPD3) is already up to date for
device. However, you may still force the install of the firmware by
specifying the option '--force'.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP Storage Enclosure Hard Disk Drives using
CP021546.scexe: the firmware version (HPDA) is already up to date for
device. However, you may still force the install of the firmware by
specifying the option '--force'.
Reboot Required :No
Coordinated Reboot Required :No
----------------------------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Success (Reboot Pending)
Code :0x1002
CONDITIONAL_SUCCESS :Flash succeeded for HP Storage Enclosure Hard Disk Drives using
CP021542.scexe. This blade and its peer both need to be shutdown and
restarted in an ordered sequence to complete the operation.
Reboot Required :Yes
Coordinated Reboot Required :Yes
----------------------------------------------------------------------------------------------------
SUMMARY:
----------------------------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
----------------------------------------------------------------------------------------------------
Enclosure_HDD HP Storage Enclosure Hard No Flash Not Attempted
Disk Drives
Enclosure_HDD HP Storage Enclosure Hard No Flash Not Attempted
Disk Drives
Enclosure_HDD HP Storage Enclosure Hard No Flash Not Attempted
Disk Drives
Enclosure_HDD HP Storage Enclosure Hard Yes Success (Reboot Pending)
Disk Drives
----------------------------------------------------------------------------------------------------
Updating firmware 35