HP Storage Platform Firmware Management Tool for StoreAll User Guide
Storage enclosure I/O module
CAUTION: Take care of the following prerequisite measures before performing a firmware update
operation on an enclosure I/O module:
• Ensure that the update of enclosure HDDs and I/O modules is an OFFLINE process.
• Ensure that all host and array I/O is stopped prior to the update.
• Do not interrupt the setup while the firmware is being updated. Ensure that the storage system
configuration is not being reconfigured during firmware update.
• Ensure that no other user is performing administrative functions on the storage system.
• Ensure that all file systems on the storage controller are unmounted. Failure to comply may
result in the operating system failing.
Example 45 Firmware update of the storage enclosure I/O module on the X9720 platform
# hpsp_fmt –f –c enclosure_io_mod
Enclosure HDDs and IO Modules update is an OFFLINE process.
Please read through the following WARNING messages before continuing with the OFFLINE updates:
***WARNING***
- Ensure that all host and array I/O must be stopped prior to the update.
- Do not interrupt the setup while firmware is getting updated.
- Ensure that the storage system configuration is not being reconfigured during firmware update.
- Ensure that no other user is performing administrative functions on the storage system.
- Make sure all the filesystems are unmounted. Failure to comply may result in an OS crashing.
Please confirm you have read all the above warning messages and taken necessary actions (Y/N)?y
Do you want to proceed (Y/N)?y
Flashing Enclosure_IO_Mod: Based on the configuration, it may take 30 minutes.
<<< Succeeded >>>
Flashing Enclosure_IO_Mod: Based on the configuration, it may take 30 minutes.
<<< Not attempted >>>
--------------------------------------------------------------------------------
Device :Enclosure_IO_Mod
Status :Success (Storage Ctlr Reboot Pending)
Code :0x1006
CONDITIONAL_SUCCESS :Flash succeeded for HP Storage Enclosure IO
Module using CP016276.scexe. The attached storage
controller(s) must be restarted to complete the
operation.
Reboot Required :No
Coordinated Reboot Required :No
--------------------------------------------------------------------------------
Device :Enclosure_IO_Mod
Status :Flash Not Attempted
Code :0x1060
INFORMATION :Flash not attempted for HP Storage Enclosure IO
Module : Storage controller enclosure IO
module(s) can only be flashed as part of storage
controller firmware flash operation. Please run
the flash operation for storage controller.
Reboot Required :No
Coordinated Reboot Required :No
--------------------------------------------------------------------------------
SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
Enclosure_IO_Mod HP Storage Enclosure IO No Success (Storage Ctlr Reboot Pending)
Module
Enclosure_IO_Mod HP Storage Enclosure IO No Flash Not Attempted
Module
--------------------------------------------------------------------------------
Updating firmware 53