HP Storage Platform Firmware Management Tool for StoreAll User Guide

StoreAll 9730 storage components
This section contains example updates of the following:
• “Storage enclosure I/O module” (page 55)
• “Storage enclosure hard disk drives” (page 55)
Storage enclosure I/O module
Example 47 Firmware update of the storage enclosure I/O module on 9730 platforms
# hpsp_fmt -f -c Enclosure_IO_Mod
Enter OA Username:Administrator
Enter OA Password:
Flashing Enclosure_IO_Mod: Based on the configuration, it may take 30 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :Enclosure_IO_Mod
Status :Success
Code :0x1000
SUCCESS :Flash succeeded for HP Storage Enclosure IO
Module using T-360.fuf
Reboot Required :No
Coordinated Reboot Required :No
--------------------------------------------------------------------------------
SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
Enclosure_IO_Mod HP Storage Enclosure IO No Success
Module
--------------------------------------------------------------------------------
Storage enclosure hard disk drives
Example 48 Firmware update of the storage enclosure hard disk drives on 9730 platforms
# hpsp_fmt -f -c Enclosure_hdd
Flashing Enclosure_HDD: Based on the configuration, it may take 15 minutes.
<<< Succeeded >>>
Flashing Enclosure_HDD: Based on the configuration, it may take 15 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Success (Reboot Pending)
Code :0x1002
CONDITIONAL_SUCCESS :Flash succeeded for HP Storage Enclosure Hard
Disk Drives using CP018290.scexe. This blade and
its peer both need to be shutdown and restarted
in an ordered sequence to complete the operation.
Reboot Required :Yes
Coordinated Reboot Required :Yes
--------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Success (Reboot Pending)
Code :0x1002
CONDITIONAL_SUCCESS :Flash succeeded for HP Storage Enclosure Hard
Disk Drives using CP014483.scexe. This blade and
its peer both need to be shutdown and restarted
in an ordered sequence to complete the operation.
Reboot Required :Yes
Coordinated Reboot Required :Yes
--------------------------------------------------------------------------------
Updating firmware 55