HP Storage Platform Firmware Management Tool for StoreAll User Guide

Example 53 Discover the active firmware version of a set of components on a 9320 platform
# hpsp_fmt -d -c ilo3,enclosure_io_mod,nic,oa
Enter OA Username:Administrator
Enter OA Password:
Based on the configuration, FW discovery may take 18 minutes.
<<< Completed >>>
-------------------------------------------------------------------------------------------------------------
Device Device ID Active FW Version Device Information Parent Device ID
-------------------------------------------------------------------------------------------------------------
ILO3 ILOUSE051560N 1.26 N/A N/A
NIC N/A 4.0.493.0 NC553i N/A
Enclosure_IO_Mod 50014380027F73A7 3.60 Encl:1,Io_Module_A N/A
Enclosure_IO_Mod 50014380027F73D7 3.60 Encl:1,Io_Module_B N/A
Enclosure_IO_Mod 50014380027F76D7 3.60 Encl:2,Io_Module_B N/A
Enclosure_IO_Mod 50014380027F76A7 3.60 Encl:2,Io_Module_A N/A
OA OB1CBP8359 3.56 20120525 OA (Active) N/A
OA O985MP4032 3.56 20120525 OA (Standby) N/A
-------------------------------------------------------------------------------------------------------------
Obtaining the update (flash) recommendation
Syntax
--flashrec
-fr
Description
The output of the --flashrec command includes the recommended action and the severity of
the recommended action. The update recommendation action can be one of the following:
• UPGRADE: The active firmware version of the component is lower than the qualified version
and should be upgraded.
• DOWNGRADE: The active firmware version of the component is higher than the qualified
version and should be downgraded.
• NONE: The active firmware version of the component is equal to the qualified version. No
action is needed unless you want to force a rewrite of the firmware in the case of the current
firmware being corrupt.
The severity of the recommended action can be one of the following:
• MANDATORY: It is critical to update the firmware for optimal performance and system stability.
• RECOMMENDED: It is optional to update the firmware from a functionality standpoint. However,
it is highly recommended to update the firmware for system stability.
The output also contains information about the reboot requirement of a component for a successful
firmware update, where necessary.
A verbose report includes additional information such as approximate flash duration, dependent
components, and so on.
60 StoreAll 9320 and 9300 FMT command reference and examples