HP Storage Platform Firmware Management Tool for StoreAll User Guide

Table 26 The base firmware version required by PCIeNIC devices
Manual procedure to bring to the base versionBase firmware versionPCIeNIC model
Perform an offline firmware update operation using the ISO file
located at /usr/local/ibrix/installation/ibrix/distrib/firmware/
4.0.360.15NC550SFP
http://h20000.www2.hp.com/bizsupport/TechSupport/
SoftwareDescription.jsp?lang=en&cc=us&swLang=8&mode=2&
taskId=135&swItem=MTX-a4c166d5db384fcd8f90314c34
4.0.230NC522SFP
Power management controller
Example 64 Firmware update of the power management controller on 9320/9300 platforms
#hpsp_fmt –fr –c Power_Mgmt_Ctlr
Based on the configuration, Flash recommendation may take 1 minute.
<<< Completed >>>
# hpsp_fmt -f -c Power_Mgmt_Ctlr --force
You have provided force option which will rewrite or downgrade the firmware
Do you want to proceed (Y/N)?y
Flashing Power_Mgmt_Ctlr: Based on the configuration, it may take 5 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :Power_Mgmt_Ctlr
Status :Success (Reboot Pending)
Code :0x1001
CONDITIONAL_SUCCESS :Flash succeeded for Power Management Controller
using CP013163.scexe. The system must be
restarted to complete the operation.
Reboot Required :Yes
Coordinated Reboot Required :No
--------------------------------------------------------------------------------
SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
Power_Mgmt_Ctlr Power Management Controller Yes Success (Reboot Pending)
--------------------------------------------------------------------------------
At this stage, you can optionally reboot the server to activate the updated firmware or wait for
other firmware updates, if any, and perform a reboot once for them all.
Embedded smart array controller (P410i)
Example 65 Firmware update of an embedded smart array controller (P410i) on 9320/9300
platforms
# hpsp_fmt -fr -c smart_array_ctlr
Based on the configuration, Flash recommendation may take 2 minutes.
<<< Completed >>>
# hpsp_fmt -f -c smart_array_ctlr
Flashing Smart_Array_Ctlr: Based on the configuration, it may take 10 minutes.
Updating firmware 69