HP Storage Platform Firmware Management Tool for StoreAll User Guide

Example 69 Firmware update of the storage enclosure hard disk drives on the 9320/9300 platforms
# hpsp_fmt -fr -c enclosure_hdd -ci 10.20.12.111 -cu <user> -cp <password>
Based on the configuration, Flash recommendation may take 20 minutes.
<<< Completed >>>
# hpsp_fmt -f -c enclosure_hdd -ci 10.20.12.111 -cu <user> -cp <password>
Please read through the following WARNING messages before continuing with the updates:
***WARNING***
- To avoid spurious failure indications and potential system crashes, you must suspend hardware monitoring
during the update process. You should execute "hpspmonControl --pause" on both servers in the couplet before
performing the flash operation. You should then make sure to execute "hpspmonControl --resume" on both
servers in the couplet after the flash operation is complete.
- Do not cycle power or restart devices during a firmware update.
- Ensure that the storage system configuration is not being reconfigured during a firmware update.
- Ensure that no other user is performing administrative functions on the storage system.
- Storage disk drive update is an OFFLINE process. Ensure that all host and array I/O must
be stopped prior to the update.
- Make sure all the filesystems are unmounted. Failure to comply may result in an OS crashing.
Please confirm you have read all the above warning messages and taken necessary actions (Y/N)?y
Do you want to proceed (Y/N)? y
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Not attempted >>>
Flashing Enclosure_HDD: Based on the configuration, it may take 90 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :Enclosure_HDD
Status :Flash Not Attempted
Code :0x1028
INFORMATION :Flash not attempted for HP Storage Enclosure Hard
Disk Drives using CP016869.scexe: the firmware
version (HPD5) is already up to date for device.
However, you may still force the install of the
76 StoreAll 9320 and 9300 FMT command reference and examples