HP XC System Software Installation Guide Version 4.0

Copyright 1992-2008 Platform Computing Corporation
My cluster name is hptclsf
My master name is lsfhost.localdomain
Checking output from command.
+++ PASSED +++
Testing hosts_static_resource_info ...
Running 'lshosts -w'.
Checking output from lshosts.
Running 'controllsf show' to determine virtual hostname.
Checking output from controllsf.
Virtual hostname is lsfhost.localdomain
Comparing ncpus from Lsf lshosts to Slurm cpu count.
The Lsf and Slurm cpu count are in sync.
+++ PASSED +++
Testing hosts_status ...
Running 'bhosts -w'.
Checking output from bhosts.
Running 'controllsf show' to determine virtual hostname.
Checking output from controllsf.
Virtual hostname is lsfhost.localdomain
Comparing MAX job slots from Lsf bhosts to Slurm cpu count.
The Lsf MAX job slots and Slurm cpu count are in sync.
+++ PASSED +++
Testing login_nodes ...
Nodes with login role: n16
Was able to run lsf commands from each login node.
+++ PASSED +++
Verify interconnect:
Testing infiniband/monitoring_line_card_setup ...
+++ PASSED +++
Testing infiniband/port_state ...
Collecting ibv_devinfo data from all enabled nodes...
Nodes with a good port_state of PORT_ACTIVE: n[14-16]
+++ PASSED +++
Verify nagios:
Testing configuration ...
Running basic sanity check on the Nagios configuration file.
Starting the command:
/opt/hptc/bin/nagios -v /opt/hptc/nagios/etc/nagios_local.cfg
Here is the output from the command:
Nagios 3.0.2
Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org)
Last Modified: 05-19-2008
License: GPL
Reading configuration data...
Running pre-flight check on configuration data...
Checking services...
243