HP XC System Software Installation Guide Version 4.0

Table 6-1 Information Required by the cluster_config Utility (continued)
Description and User ActionItem
• Configuration information for the LDAP admin user, the user who is granted
LDAP administration privileges.
In the following example, the common name (cn) of the user must be admin, the
user ID (uid) is ldap and the organizational unit (ou) is Admin:
Enter the LDAP admin user [cn=admin]: uid=ldap,ou=Admin
• Password for the admin user.
• Configuration information for the LDAP sync user, the user who synchronizes
the replication servers with the master server. In the following example, the
common name (cn) of the user must be sync, the user ID (uid) is ldap and the
organizational unit (ou) is Admin:
Enter the LDAP sync user [cn=sync]: uid=ldap,ou=Admin
• Password for the LDAP sync user.
IMPORTANT: The information described here is not intended to be a comprehensive
LDAP configuration guide. If you are not an experienced LDAP user, see the following
web site to obtain more information about configuring LDAP:
http://www.openldap.org/doc/admin23/
When you are finished entering your LDAP configuration information, you can
manually edit the LDAP configuration files with additional information.
The following files contain LDAP configuration information:
• /etc/openldap/slapd.conf (server configuration file)
• /etc/openldap/ldap.conf (client configuration file)
• /etc/ldap.conf (client configuration file)
If you assign a nis_server role to configure one or more nodes as a NIS slave
server, you are prompted to enter the name of the NIS master server or its IP address
as well as the NIS domain name.
NIS configuration
You are prompted for the following information about the SLURM configuration:
• Whether you want to configure SLURM. You are not required to configure SLURM,
however, SLURM is required by LSF with SLURM and SVA.
• A SLURM user name. A default value is provided, but you can specify your own
SLURM user name.
• The node on which to configure the primary SLURM controller
• The node on which to configure the backup SLURM controller
• Whether to configure user-restricted access on the compute nodes
SLURM configuration
6.1 Preparing to Answer cluster_config Questions 99