ProLiant DL580 Generation 5 User Guide

Hardware options installation 44
5. If you are installing FBDIMMs in an online spare or mirrored configuration, use RBSU ("HP ROM-
Based Setup Utility" on page 66) to configure this feature.
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
• The system automatically sets all device numbers.
• If only one hard drive is used, install it in the bay with the lowest device number.
• Hard drives must be SFF types.
• Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
Installing a hot-plug SAS hard drive
1. Remove the hard drive blank.