HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

fileSystemType=NTFS1
fileSystemName=E:
sizeInMB=156
percentUsed=50
lastUpdated=1039003476
*****: The value is encoded by the CLI.
ModifyVirtualizationServer
ModifyVirtualizationServer modifies information about virtualization servers.
NOTE:
This command does not support configurations that use Host Data Collector as the virtualization-server
management program.
• If you are using VMware ESX 4.x or VMware ESXi 4.x as the virtualization software, you can
execute the command only if you are using vMA as the virtualization-server management program.
• If you are using VMware ESXi 5.x as the virtualization software, you cannot execute the command.
Format
When modifying information about a virtualization server:
hdvmcli [URL] ModifyVirtualizationServer [options]
hostname=host-name-of-virtualization-server
[ipaddress=IP-address] [hostprotocol={Secure|Non-secure}]
[hostuserid=user-ID] [hostuserpassword=user-password]
Parameters
Table 96 ModifyVirtualizationServer command parameters
DescriptionStatusParameter name
Host name of the virtualization server whose information is to be
modified
Required
hostname
IP address
Specify this parameter if you want to modify the IP address of the
virtualization-server management program.
You can specify an IPv4 or IPv6 IP address.
Optional
#
ipaddress
Protocol of the virtualization-server management program
Specify this parameter if you want to modify the protocol.
You can specify either of the following values:
• Non-secure: HTTP communication
• Secure: HTTPS communication
Optional
#
hostprotocol
Command reference272