HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide
DescriptionAttribute
Total size of the open logical units and the intermediate logical units that satisfy
all the following conditions (in KB):
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
• The logical unit is a real volume that has physical capacity.
openReservedActual-
Capacity
Type of the parity group
For P9500, XP24000/XP20000, or XP12000/XP10000/SVS200, one of the
following values is output:
• -1: None
• 0: Normal parity group
• 1: External volume parity group
• 2: Snapshot V-VOL parity group
• 3: THP/Smart volume parity group
-1 is output for other storage systems.
type
Option information of the external parity group
For P9500, XP24000/XP20000, or XP12000/XP10000/SVS200, a 3-bit value
is converted to decimal and is output.
• Bit 0 (0x01): Whether or not the cache mode is enabled
• Bit 1 (0x02): Whether or not the I/O suppression mode is enabled
• Bit 2 (0x04): Whether or not the cache inflow control mode is enabled
For each of these bits, 1 means enabled and 0 means disabled. For example,
when the cache mode and the cache inflow control mode are enabled, 5 is output
as the value of the volumeType attribute.
-1 is output in other cases.
volumeType
Indicates whether the data that is stored in the parity group is encrypted.
For P9500 or XP24000/XP20000, one of the following values is output:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
CLI Reference Guide 319