HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide
DescriptionAttribute
LDEV type
One of the following values is output for :
• -1: Unknown
• 1: Mainframe volume
• 2: Intermediate volume
• 3: Open volume
volumeKind
LDEV status
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• Unknown: Unknown
• Normal: Normal status
• Normal(Quick Format): Normal status (Quick Format)
• Blocked: Blocked status or unformatted.
• Format: The LDEV is being formatted.
• Correction Access: The access attribute is being modified.
• Copying: Data is being copied.
• ReadOnly: Read-only
• Shredding: The LDEV is being shredded.
• Preparing Quick Format: Quick Format is being prepared.
Unknown is output for other storage systems.
status
Type of the THP/Smart volume
One of the following values is output for P9500 or XP24000/XP20000:
• -1: Non-THP/Smart volume
• 0: THP/Smart volume
• 1: THP/Smart pool volume
-1 is output for other storage systems.
thpType
Usage of the THP/Smart volume (KB)
One of the following values is output for P9500 or XP24000/XP20000:
• When the LDEV is not a THP/Smart volume: The same value as sizeInKB
• When the LDEV is a THP/Smart volume: Usage of the THP/Smart volume
For P9500 or XP24000/XP20000, note the following points on the value that is
output for THP/Smart volume usage:
• When the THP/Smart volume has not been assigned to a THP/Smart pool, 0
is displayed.
• When the operator is the partitioned storage administrator, -1 is displayed.
• The capacity of the THP/Smart volume is allocated from a THP/Smart pool in
tens of MB, so when the usage of the THP/Smart volume reaches 100%, the
value of consumedSizeInKB might not be equal to the value of sizeInKB.
• This value might greatly increase depending on the combination of the file
system and the OS of a host that uses the THP/Smart volume. For details, see
the Thin Provisioning documentation.
-1 is output for other storage systems.
consumedSizeInKB
Output items332