HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionAttribute
Serial number of the drive
This item is not output.
serialNumber
Type of the storage system containing the physical device
• P9500: P9500
• XP24K: XP24000/XP20000
• XP12K/10K/SVS200: XP12000/XP10000/SVS200
• XP1024/128: XP1024/XP128
dkuType
Drive revolutions per minute
This information is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200.
0 or -1 is output if the drive revolutions are unknown.
rpm
Currently, this information does not apply to storage systems (-1 is output).diskType
Currently, this information does not apply to storage systems (-1 is output).formFactor
ID of the PDEV
pdevid
Name of the parity group to which the PDEV belongs
arrayGroupName
Currently, this information does not apply to storage systems.
diskModelSize
Currently, this information does not apply to storage systems (-1 is output).encrypted
PerformanceStatus instance
The PerformanceStatus instance is output when the RefreshPerformanceData command
(see “RefreshPerformanceData” on page 214) is executed.
Table 135 PerformanceStatus instance attributes
DescriptionAttribute
Type of the storage system
arrayType
Serial number of the storage system
serialNumber
Performance information acquisition status
• SUCCEEDED
• FAILED
• NO_DATA
NO_DATA is output when the target storage system is monitored by HP Storage-
Works P9000 Performance Advisor Software but no performance information
has been accumulated.
• Not collected
Not collected is output when the target storage system is not monitored
by HP StorageWorks P9000 Performance Advisor Software.
status
Output items346