HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 User Guide (TB581-96337, March 2013)

TIP:
If you want to allocate volumes to an FCoE port, you need to manually add a WWN.
To remove registered hosts, select the hosts to be removed, and click Remove Hosts.
Registering hosts manually by specifying the WWN target
You can register hosts manually to manage and monitor the hosts by specifying a WWN address.
Items to check beforehand:
• Host name
• OS type
• Unregistered WWN
1. From the Administration tab, select Managed Resources.
2. From the Hosts tab, click Add Hosts.
3. In the Add Hosts dialog box, select Add Hosts Manually.
4. Specify the appropriate information, and then execute the task.
Registered hosts can be viewed in the resource tree view.
TIP:
To remove registered hosts, select the hosts to be removed, and click Remove Hosts.
Registering hosts by using vMA
You can register hosts using vMA to manage and monitor the hosts.
Items to check beforehand:
• Host IP address for vMA (IPv4 or IPv6)
NOTE:
To register a virtualization server, you cannot specify a subnet, a range, and multiple IP addresses.
• User name and password for logging on to vMA (with Administrator or superuser permissions)
• Version of the virtualization server
NOTE:
The virtualization server must be VMware ESX 4.x or VMware ESXi 4.x. For VMware ESXi 5.x,
use Host Data Collector. For details about supported versions, see the Release Notes .
Tasks to be completed beforehand:
• Target hosts are connected to the network
Discovering, registering, and adding management targets34