HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

DetailsParameter
Specify whether the unused capacity in the migration-target volume is to be released
after migration terminates normally.
• Yes: Release the unused capacity. (Default)
• No: Do not release the unused capacity.
To enable this parameter specification, the following conditions must be satisfied:
• The migration-target volume is either a THP volume or THP pool.
• If the storage product is XP24000/XP20000 storage, the microcode version is
60-07-0x-xx/xx or later.
• The migration-source volume is a THP volume that is part of a Continuous Access
Software or Continuous Access Journal pair in HP P9500 storage (microcode
version 70-02-00-xx/xx or later) or XP24000/XP20000 storage.
• The migration-source volume is a THP volume that is part of a Business Copy
pair in HP P9500 storage (microcode version 70-05-02-xx/xx or later) when
the pair volume status is Split (that is, the value of the status attribute of
the ReplicationInfo object of the GetStorageArray (subtarget=Rep-
licationInfo) command in Device Manager CLI is 16).
If the above conditions are not satisfied, even if Yes is specified for this parameter,
the unused capacity is not released, and no message will be output.
[zerodatadiscard]
Specify the address to be notified when the event occurs.
Specify a value by combining mailto: and the email address.
[notifytourl]
Specify a description of the migration task.
[description]
Legend:
[ ]: Specifying this parameter is optional.
Output items
Table 46 Items output by the CreateMigrationTask command (Task instance)
DescriptionItem
The task ID.
The task ID format is TK########. The time and serial number are converted to
base 36 and displayed in the format ########.
ID
The type of task (Migration)taskType
The task status
For details on the values displayed, see “Task statuses” on page 167.
status
The estimated time for the task execution. If you specify the erasedata parameter
during task creation, and then execute the task, this value will include the time to
delete data.
This value is displayed in hhhh:mm:ss format.
If the estimated value is 10,000 hours or more, 9999:59:59 is displayed.
timeEstimate
The date and time when the task was created
creationTime
The date and time when task execution ended
endTime
Details of CLI commands106