HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

DescriptionItem
The device ID of the LU in the storage system that stores the actual data of the
migration target volume.
For the HP storage system, - is displayed.
targetSubsystem-
DeviceID
The number for the SLPR to which the migration target volume belongs
targetSLPRNumber
The number for the CLPR to which the migration target volume belongs
targetCLPRNumber
The RAID level of the migration target volume
targetRAIDLevel
The type of drives in which the migration target volume exists
targetDiskType
The name of the controller parity group in which the migration target volume exists
targetControllerAr-
rayGroupName
The parity group name of the migration target volume
targetArrayGroup-
Name
The parity group usage rate (%) of the target volume. Up to 2 decimal places are
displayed.
targetArrayGroup-
BusyRate
The maximum parity group usage rate (%) of the target volume. Up to 2 decimal
places are displayed.
targetArrayGroup-
MaxBusyRate
The emulation type
emulationType
The capacity of the volume (units: KB).
capacityInKB
The migration status for each volume
For details on the values displayed, see “Task statuses” on page 167.
status
Indicates the migration progress for each volume, as a percentage. Values of less
than 1% are rounded down and displayed as an integer. (For example, 45.3% is
rounded down to 45%.)
migrationProgress
The elapsed time from the start of the task execution for each volume.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
The estimated time for the task execution for each volume. If you specify the
erasedata parameter during task creation, and then execute the task, this value
will include the time to delete data.
This value is displayed in hhhh:mm:ss format.
If the estimated value is 10,000 hours or more, 9999:59:59 is displayed.
timeEstimate
CLI Reference Guide 125