HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

DescriptionItem
The SLPR number
SLPRNumber
The CLPR number
CLPRNumber
The RAID level
RAIDLevel
The drive type
diskType
Drive model name
diskModelName
Drive speed (rpm)
- is displayed if SSD is specified for DiskType.
diskRPM
Indicates whether the parity group is encrypted. This can be any of the following:
• Enabled: The parity group is encrypted.
• Disabled: The parity group is not encrypted.
• -: Indicates a THP volume, V-VOL, or LUSE volume. Alternatively, the encryption
feature is not supported.
encryption
The drive capacity (units: GB)
diskCapacityInGB
The guard attribute that is applied to the LDEV. There are six guard attributes, as
listed below. If more than one attribute is applicable, they are separated with a
semicolon (;). For the Read/Write attribute, nothing is displayed.
• Read/Write
• Read only
• Protect
• Invisible
• Zero Read Capacity
• S-VOL disable
guardMode
The date the locked period expires. If there is no expiration date, Unlimited is
displayed.
retainedThrough
The date the lock was set. This information is displayed only when Tiered Storage
Manager software was used. If the lock was set by another program, this informa-
tion is not displayed.
guardDate
The parity group number of the LDEV
controllerArray-
GroupNumber
The parity group name of the LDEV
controllerArray-
GroupName
The cache mode. This can be either Enable or Disable:
• Enable: The cache mode is ON
• Disable: The cache mode is OFF
cacheMode
The I/O suppression mode. This can be either Enable or Disable:
• Enable: The I/O suppression mode is ON
• Disable: The I/O suppression mode is OFF
IOSuppressionMode
Details of CLI commands156