HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

4. Execute the setup batch file setup.bat from the command prompt, as follows:
system-drive\TieredStorageManager\Tiered-Storage-Manager-version\Setup\setup.bat
The setup.bat file stores and sets up the common library for collecting trace information, and
edits the CLI execution batch file. The common library is stored in the following folder:
system-drive\Program Files\Hitachi\HNTRLib2
NOTE:
Note the following about executing setup.bat:
• In Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2012, execute
setup.bat as a user with Administrator permissions. To do so, right-click the command prompt,
choose Run as administrator, and then execute setup.bat. If you execute setup.bat as a
user who does not have Administrator permissions, an error message is displayed and setup ter-
minates.
• When setup.bat is executed, the extraction location is checked. If it is executed from a location
other than the folder shown above, an error message is displayed and setup terminates.
Setting up the CLI in a Solaris, HP-UX, or Linux system
This section describes how to set up the CLI if the management client OS is Solaris, HP-UX, or Linux.
Before starting the setup, make sure that the following conditions are satisfied:
• JRE is installed.
• At least 100 MB of unused capacity exist on the drive containing the /opt directory.
To set up the CLI:
1. Log on to the management client as a user who has administrator privileges (root).
Preparations for executing the CLI20