HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)

volume replication functionality such as Continuous Access Software or Continuous Access Journal,
which allows you to copy data between storage systems.
The following examples are provided:
• Backing up storage groups to a remote site.
• Restoring the storage groups backed up in the remote site to the local site (if the local site is oper-
ating properly)
The examples in this section assume the system configuration shown in the following figure.
Figure 120 System configuration for backing up and restoring a storage group between a local site
and a remote site
The examples in this section assume the following conditions:
• The system has a database server (DBServer) in the local site and a backup server (BKServer)
in the remote site connected to a tape device.
• The FTP service on the backup server in the remote site is started, and the system is set up so that
a user who has logged onto the OS of each file server can log into the FTP server and transfer
files to the FTP server. The FTP user ID is admin, and the FTP user password is password.
• As Exchange Server has been installed on the backup server (BKServer) in the remote site, if the
storage system in the local site fails, Exchange Server can be used as a database server.
• The primary volume in the local site is mounted on the D: drive and E: drive of DBServer.
Operation for Exchange databases418