HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

The alerts that Device Manager can display differ by storage system. The table below lists the alerts
that are supported by each storage system.
Table 36 Alerts that can be displayed by Device Manager
SNMP trapsPollingManagement target
YYHP XP7
Storage system
YYP9500
YYXP24000/XP20000
YYXP12000/XP10000/SVS200
YYXP1024/XP128
----SMI-S enabled storage systems
Legend
Y: Supported
--: Not supported
Related topics
• Settings for displaying SNMP traps as alerts, page 126
• Changing Device Manager server properties, page 316
• server.dispatcher.daemon.pollingPeriod, page 330
Settings for displaying SNMP traps as alerts
To display SNMP traps as alerts, the following settings are required:
• Settings for Device Manager to receive SNMP traps
• Device Manager must be able to use port 162/udp of the management server.
• Specify true for the server.dispatcher.daemon.receiveTrap property.
• Settings for reporting SNMP traps to Device Manager
• The IP address of the management server must be registered in the SNMP Agent settings for
storage systems as a target for trap notification.
After the above settings finish, the Device Manager server receives SNMP traps from all communities
and displays them as alerts.
Related topics
• Changing Device Manager server properties, page 316
• server.dispatcher.daemon.receiveTrap, page 330
Operation flow for reporting alerts by email
When an alert is issued on a storage system, the alert can be automatically reported to users by email.
This enables users to be aware of failures that have occurred in storage systems without logging in
to the management client.
The settings required for sending alerts to users by email are described below.
Setting up logs and alerts126