HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

• Specify a header in the first line, nothing in the second line, and the email body and parameters
in the third and following lines.
• Specify a header in the format Subject: email-title.
• Specify parameters in the format ${parameter-name}.
The parameter name is case sensitive.
• Use UTF-8 encoding to code.
• The file size must not exceed 64 KB.
• The length of each line must not exceed 1024 bytes, excluding linefeed characters.
The following table shows the specifiable parameters:
Table 37 Parameters you can set in the mail-alert-detection.txt file
DescriptionParameter name
Alert ID
messageID
Alert type
alertType
Storage system name
source
Severity of the alert
status
Storage system component where the alert occurred
component
Description of the problem
description
Action that has to be taken for the problem
recommendedAction
Supplementary information
additionalInfo
Time at which the Device Manager server acquired alert information
Display format: yyyy/mm/dd hh:mm:ss
hh is displayed by using 24-hour display.
occurrenceTime
Related topics
• Starting the HP XP7 Command View Advanced Edition services, page 165
• Stopping the HP XP7 Command View Advanced Edition services, page 166
Sending SNMP traps to log files
Device Manager receives SNMP traps issued by devices on the network and outputs them to log files.
SNMP traps (SNMP version1 only) issued by devices that are not management targets can also be
output to log files, as well as SNMP traps issued by the management-target storage systems.
Received SNMP traps are output to the following files:
• Event log or syslog
• Common Component trace log files (hntr2n.log)
• Device Manager trace log files (HDvMtracen.log)
• Trace log files (trace.log)
•
Error log files (error.log)
#
#:
Administrator Guide (Web Version) 131