HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

3. Use the Device Manager GUI or CLI to refresh the storage system that contains the copy pair

volumes for which the configuration definition file was created.

NOTE:

• If a parameter not supported by Device Manager is used, the configuration definition file is assumed

to be invalid and the system does not execute normal processing. Even though a parameter is

supported, Device Manager might not support certain description formats. Note that the configur-

ation definition file is assumed to be invalid if an item is specified using an unsupported format.

• Do not specify the following instance numbers and UDP port numbers in the configuration definition

file, because the Device Manager agent temporarily uses these values to acquire copy pair inform-

ation:

- Instance number: 900 to 998 (default)

- UDP port number: 53232 to 53330 (default)

If these instance numbers or UDP port numbers are used, RAID Manager error information might

be output to the system log or event log.

TIP:

To change the instance numbers and UDP port numbers that are temporarily used by the Device

Manager agent, use the server.agent.rm.temporaryInstance and

server.agent.rm.temporaryPort properties in the server.properties file.