HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

•

HORCM_CTQM

This parameter is supported by Device Manager agent version 8.0 or later. However, the definition

of the HORCM_VCMD property cannot be changed from a Device Manager agent.

This parameter is supported by Device Manager agent version 6.2 or later. Note that when you

create or use a copy pair, even if HORCM_CTQM information is defined in the configuration

definition file, the Device Manager agent will operate while ignoring the definition. The Device

Manager agent does not add the HORCM_CTQM definitions to the configuration definition file, nor

does it add a pair group to the existing definitions. However, when you delete a pair, any

definitions of that pair group that exist in the HORCM_CTQM definitions will also be deleted.

Related topics

• Description conventions for the configuration definition file, page 223

• HORCM_MON parameter description format, page 224

• HORCM_CMD parameter description format, page 225

• HORCM_DEV parameter description format, page 227

• HORCM_LDEV parameter description format, page 228

• HORCM_INST parameter description format, page 230

• HORCM_INSTP parameter description format, page 232

Description conventions for the configuration definition file

If a configuration definition file is not created in accordance with the description conventions, Device

Manager assumes that the configuration definition file is invalid.

Create a configuration definition file in accordance with the following conventions.

• A configuration definition file cannot include a line that consists only of space characters.

• If the version of Device Manager agent is 5.5 or earlier, a line that starts with H and includes any

of the following character strings cannot be included (except in the starting line of the parameter):

HORCM_MON, HORCM_CMD, HORCM_VCMD, HORCM_DEV, HORCM_LDEV, HORCM_INST, HORCM_IN-

STP, HORCM_CTQM, HORCM_LDEVG, HORCM_ALLOW_INST

• If the version of the Device Manager agent is from 7.0.0 to 7.0.1, a virtual command device must

not be defined for the HORCM_CMD parameter in the configuration definition file.

• The configuration definition file must be created in accordance with the following conditions:

• HORCM_MON must be defined.

• At a minimum, either HORCM_DEV or HORCM_LDEV must be defined.

• At a minimum, either HORCM_INST or HORCM_INSTP must be defined.

• HORCM_ALLOW_INST must not be defined.

• A virtual ID must not be defined for the HORCM_DEV parameter in the configuration definition file.