HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

• HORCM_INST parameter description format, page 230
• HORCM_INSTP parameter description format, page 232
HORCM_MON parameter description format
Use the HORCM_MON parameter to specify the machine information for the local host and the interval
for monitoring errors in copy pair volumes.
• ip_address
Specify the IP address (the Device Manager agent whose version is 5.9 or later supports the IPv6
protocol), host name, NONE, or NONE6. Note that if you use Replication Manager to generate a
configuration definition file, this item will always be specified for the host name (Replication
Manager uses a Device Manager agent to view the configuration definition file).
• Specify the information for the host managed by the Device Manager server.
• Match the IP address version (IPv6 or IPv4) to the one specified for HORCM_INST or HORCM_IN-
STP.
• If an IPv6 environment is being used, specify an IP address. If you specify a host name, an
IPv4 environment is used.
• The table below lists the values that can be specified for ip_address. Note that some formats
cannot be specified for ip_address because they cannot identify a host.
Table 70 Values that can be specified for the ip_address of HORCM_MON parameter
Device Manager agent version
Value
05-70 or earlier05-805.9 or later
YesYesYesIP address
YesYesYesHost name
No
Yes
#
Yes
#
NONE
NoNoNo
"__NONE__"
NoNo
Yes
#
NONE6
NoNoNo
"__NONE6__"
No
Yes
#
Yes
#
Loopback IP addresses (127.0.0.1 to
127.255.255.254)
No
Yes
#
Yes
#
Loopback host name (localhost)
NoNoNoCluster virtual IP address
NoNoNoCluster virtual machine name
Legend:
Yes: Can be specified.
No: Cannot be specified.
#: Can be specified when the copy pair is managed from the Device Manager CLI. However,
this item cannot be specified when copy pair operations are performed from the Device Man-
ager GUI or Replication Manager.
Using the Device Manager agent224