HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.classloader property of the Device Manager server (when
non-SSL communication is used by Host Data Collector and the Device Manager server).
Related topics
• Registering an exception for the Host Data Collector service (for non-SSL communication), page 84
• hdc.classloader, page 342
• hdc.ssl.secure, page 372
hdc.common.rmi.ssl.registryPort
Specify the SSL communication port number of the RMI registry.
Specifiable range: 1 to 65535.
Default: 22104
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the netsh command to reset the firewall exemptions (when the value of the hdc.ssl.secure
property is 2 or 3).
• Set the same value as the hdc.rmiregistry property of the Device Manager server (when SSL
communication is used by Host Data Collector and the Device Manager server).
Related topics
• Registering an exception for the Host Data Collector service (for SSL communication), page 85
• hdc.rmiregistry, page 341
• hdc.ssl.secure, page 372
hdc.common.rmi.ssl.serverPort
Specify the SSL communication port number of the RMI server.
Specifiable range: 1 to 65535.
Default: 22105
Host Data Collector properties370