HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

- P-VOL
- S-VOL
- All pool volumes that make up a pool (when managing Snapshot or Fast Snap pairs)
- All journal volumes that make up a journal (when managing Continuous Access Journal pairs)
A resource group in which a command device has been registered must be created and as-
signed to each user.
Command devices whose storage system resource group ID is 0 (resource pools of the default
virtual storage machine in HP XP7) are connected to the pair management server, and the
information of the command devices is defined in the rgcmddev.properties file of the
Device Manager agent.
The authentication mode is enabled for the command device, and the raidcom -login
command is used for user authentication for all the command devices whose storage system
resource group ID is 0 (resource pools of the default virtual storage machine in HP XP7).
If the OS of the host is Windows, you must be authenticated as the user who executes the
Device Manager agent service (HBsA Service).
When a virtual storage machine is created to manage resources in HP XP7:
The volumes below must be registered in a virtual storage machine by the user.
- P-VOL
- S-VOL
- All pool volumes that make up a pool (when managing Snapshot or Fast Snap pairs)
Command devices and journal volumes are registered in resource groups created on the default
virtual storage machine, and the command devices and the journal volumes are assigned to
the user.
If virtual IDs are used and different storage systems have the same serial number, the command
devices in each storage system are connected to a different pair management server.
CAUTION:
When the Device Manager agent is running, do not perform logout processing of user authentication
for the storage system by directly executing a RAID Manager command. If you do so, processing
performed from the Device Manager GUI or CLI might not finish properly. If you need to log out, stop
the Device Manager agent service first.
Related topics
Storage system requirements for managing copy pairs, page 58
Prerequisite version of the Device Manager agent for managing copy pairs , page 60
Changing Device Manager agent properties, page 377
server.agent.rm.centralizePairConfiguration, page 388
Properties for command devices connected to Device Manager agent (rgcmddev.properties
file), page 394
How to install RAID Manager: RAID Manager documentation
System configuration for using a virtual command device server configuration to manage
copy pairs
Set up the management server, hosts (application servers), virtual command device server, and storage
system so that the prerequisites are satisfied.
System configuration and requirements50