HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

To link with storage systems that support IPv6:
• On the Device Manager server, open the server.properties file, and set either of the
following items for the server.http.host property:
• The IPv6 address of the computer on which the Device Manager server is installed
• The host name of the computer on which the Device Manager server is installed
The host name must be resolvable to the IPv6 address.
CAUTION:
If XP24000/XP20000 storage system or XP12000/XP10000/SVS200 storage system that
is managed via an IPv4 address is also set up as a Device Manager management-target,
IPv4 addresses must also be set for any NICs that have IPv6 addresses specified for the
server.http.host property.
Related topics
• Changing Device Manager server properties, page 316
• server.http.host, page 317
Changing the IP address or host name of the management
server
If you change the IP address or host name of the management server because of changes to the
network configuration, you also need to change the settings for HP XP7 Command View Advanced
Edition products.
Changing the host name of the management server
To apply the changed host name to the HP XP7 Command View Advanced Edition products, edit the
/etc/hosts file (in Linux) , user_httpsd.conf file, and cluster.conf file (for cluster
configurations), and then restart the computer.
Information to collect in advance
• Changed host name of the management server
The host name must be no more than 128 bytes. For HP XP7 Command View Advanced Edition
products, the host name is case sensitive.
TIP:
If you change the host name of the management server in advance, keep a note of the new host
name that is displayed by the hostname command. In Windows, you can also use the ipconfig
/ALL command to display the host name.
To change the host name of the management server:
1. Stop the HP XP7 Command View Advanced Edition product services.
Administrator Guide (Web Version) 89