HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

TIP:
You can also use the GUI to delete the following messages:
• A message registered from the GUI
• A message registered by the hcmdsbanner command with the locale option omitted
If the system is in a cluster configuration, operations from the GUI are applied only to the executing
node. To apply the operation to the standby node, switch the nodes and then perform the same
operations.
Communication security mode
This information is under export control and is not available on the web. To view the contents of this
chapter, see the manual that is shipped with the product.
Controlling management client access to the management
server
In P9000 Command View AE Suite products, you can control which management clients can access
the management server through the GUI or CLI. To restrict the management clients that can access
the management server, edit the httpsd.conf file and the properties file for the Device Manager
server.
Information to collect in advance
• Information about the management clients that can access the management server
Use either of the following formats to specify the management clients that can access the manage-
ment server:
• The domain name (example: hp.com)
• Part of the domain name (example: hp)
• The IPv4 or IPv6 address (example: 10.1.2.3 127.0.0.1 2001::123:4567:89ab:cdef)
• Part of the IPv4 address (example: 10.1 which, in this case, means 10.1.0.0/16)
• IPv4 Network/Netmask format (dot notation) (example: 10.1.0.0/255.255.0.0)
• IPv4 or IPv6 Network/c (CIDR notation: c is a decimal integer that indicates the number of
bits for identifying a network) (example: 10.1.0.0/16 2001:0:0:1230::/64)
To control management client access to the management server:
1. Stop the services of P9000 Command View AE Suite product.
Security114