HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

4. Use a text editor to create a cluster-configuration file on the executing node and a cluster
configuration file on the standby node.
The items to be specified in a cluster-configuration file are as follows:
For the executing node:
mode=online
virtualhost=logical-host-name
onlinehost=executing-node-host-name
standbyhost=standby-node-host-name
For the standby node:
mode=standby
virtualhost=logical-host-name
onlinehost=executing-node-host-name
standbyhost=standby-node-host-name
Save each created file on its node as cluster.conf in
installation-folder-of-Common-Component\conf.
CAUTION:
• For mode, specify online for the executing node, and specify standby for the standby
node.
• For virtualhost, onlinehost, and standbyhost, an IP address cannot be
specified. Also make sure that an IP address can be resolved from the host name.
• The IP address that is assigned to the logical host name specified in virtualhost
must be enabled and accessible.
5. On both the executing and standby nodes, open the server.properties file, and then specify
a logical host name for the server.http.host property.
installation-folder-of-the-Device-Manager-server\Server\config\
server.properties
Administrator Guide (Web Version) 187