HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

Specify this option to start the Device Manager agent service.
stop
Specify this option to stop the Device Manager agent service.
If the -f option is also specified, the command forces the Device Manager agent service to stop.
In such a case, all processing is forced to terminate, thus ongoing processing of jobs is not
guaranteed.
status
Specify this option to check the operating status of the Device Manager agent service.
CAUTION:
• Depending on the performance or the load status of the host computer, the Device Manager agent
service might not stop immediately, even if the hbsasrv command finishes.
• If any add-on module or version 5.8 or later of Hitachi Dynamic Link Manager is still running,
you might not be able to stop the Device Manager agent service. In such a case, the error message
KAIE62604-E is output. Wait until the add-on module or Hitachi Dynamic Link Manager completes
its operation, and then execute the command again.
• The version information displayed when the command is executed with the status option specified
is not the version information for the Device Manager agent. You must use hdvm_info commands
to check the Device Manager agent version.
Related topics
• Displaying the version of the Device Manager agent (hdvm_info command), page 240
Changing the user who executes the service (Windows)
This section explains how to change the user who executes the Device Manager agent service to a
member of the Administrators group.
Information to collect in advance
User name and password of the new user (a member of the Administrators group).
To change the user who executes the service:
1. Stop the Device Manager agent service.
2. Open the Services window by selecting Administrative Tools, and then Services.
3. Select HBsA Service, Operations, and then Properties.
The HBsA Service property window opens.
4. Click the Logon tab, and then select Account.
5. Set up the user and password, and then click OK.
6. From the Services window, select HBsA Service, and then start it.
Related topics
• Starting and stopping the Device Manager agent service, and checking the operating status of
the service (hbsasrv command), page 237
Using the Device Manager agent238