HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

In AIX:
/usr/HDVM/HBaseAgent/bin
Setting the Device Manager server's information, HiScan command's execution
period, and RAID Manager's information (hdvmagt_setting command)
Use the hdvmagt_setting command to set the Device Manager server's information, the HiScan
command's automatic execution period, and the information necessary for using RAID Manager.
This command lets you interactively set the items listed in the following table.
Table 83 Items that can be set by using the hdvmagt_setting command
DetailsItem
IP address or host name
If you specify the IP address, you can use either an IPv4 or IPv6
address. Abbreviation can be used.
The host name must satisfy the following conditions:
Host name length: 50 bytes or less
Available characters: A to Z a to z 0 to 9 - _ . @
Port number
The default port is 2001.
User ID and password
Enter the user ID and password for the Device Manager agent re-
gistered with the Device Manager server. For a built-in account for
use with the Device Manager agent, the user ID is HaUser and the
default password is haset.
Information for the Device Manager
server
One of the following three automatic execution periods can be selected
for the HiScan command:
• Hourly
• Daily
• Weekly
Note that any execution time can be specified.
If you do not specify the execution time, for the hourly execution period,
the HiScan command is executed at the 30th minute of every hour. For
the daily or weekly period, the command is executed at 2:30 AM.
If the Device Manager agent has been installed on multiple hosts, select
the daily or weekly time period to reduce the load on the Device Manager
server. Also, adjust the command execution times on those hosts so that
information about multiple hosts is not reported to the Device Manager
server at the same time.
Execution period for the HiScan
command
Installation location
Specify the drive or directory where RAID Manager is installed.
Central management method
Specify whether to perform central management of copy pairs on
the target hosts.
Information for using RAID Man-
ager
Operations to complete in advance
Log in as a user with Administrator permissions (for Windows) or as a root user (for UNIX).
Administrator Guide (Web Version) 241