HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

Yes: Supports all description formats.
Related topics
Editing the configuration definition file, page 249
Description conventions for the configuration definition file, page 251
Notes on using the configuration definition file, page 262
HORCM_DEV parameter description format
Use the HORCM_DEV parameter to specify information about the storage system that contains volumes
to be used as copy pairs.
dev_group
Specify the group name.
The combination of the dev_group and dev_name values must not be duplicated in the
configuration definition file for a host.
Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
dev_name
Specify the name of the pair volume.
The same dev_name value must not be duplicated in a configuration definition file.
Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
port#
Specify the port name.
If you specify the host group number immediately after specifying the port name for port#, the
range of values that you can specify differs depending on the version of the Device Manager
agent. When the version of the Device Manager agent is 5.6 or later, specify a value from 0 to
254. When the version of the Device Manager agent is 5.5 or earlier, specify a value from 0 to
127.
targetID
Specify the target ID of SCSI/Fibre.
LU#
Specify the LU number of SCSI/Fibre.
MU#
Specify the mirror descriptor using a numeric value or the h addition. You can omit this by leaving
it blank.
The value that can be specified for MU# differs depending on the Device Manager agent version
being used and the copy type.
When the version of the Device Manager agent is 7.4.0 or later:
Business Copy: 0 to 2
Snapshot: 0 to 63
Fast Snap: 0 to 63
Continuous Access: Not specified
Continuous Access Journal: Not specified
#
, 0
#
, h1, h2, or h3
#:
Administrator Guide (Web Version) 255