HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

• The table below lists the values that can be specified for ip_address. Note that some formats
cannot be specified for ip_address because they cannot identify a host.
Table 92 Values that can be specified for the ip_address of HORCM_INST parameter
Device Manager agent version
Value
05-70 or earlier05-80 or later
YesYesIP address
YesYesHost name
NoSometimes
Loopback IP addresses (127.0.0.1 to
127.255.255.254)
NoSometimes
Loopback host name (localhost)
NoNoCluster virtual IP address
NoNoCluster virtual machine name
Legend:
Yes: Can be specified.
Sometimes: Can be specified when the copy pair is managed from the Device Manager CLI.
However, this item cannot be specified when copy pair operations are performed from the
Device Manager GUI or Replication Manager.
No: Cannot be specified.
• service
Specify the port name or port number.
• Specify the port name using 1 to 15 single-byte characters. The environment must support the
conversion of port names to port numbers.
• Specify the port number as a numeric value from 0 to 65535.
Table 93 Support status of HORCM_INST parameter description format
Item
Version
serviceip_addressdev_group
YesYesYes7.0 or later
Yes
Supports IP address and host
name.
Yes6.1 to 6.4
Only supports port number
specification.
Supports IP address and host
name.
Yes
Earlier than
6.0
Legend:
Yes: Supports all description formats.
Related topics
• Editing the configuration definition file, page 249
• Description conventions for the configuration definition file, page 251
• HORCM_MON parameter description format, page 252
Administrator Guide (Web Version) 259