HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

• HORCM_DEV parameter description format, page 255
• HORCM_LDEV parameter description format, page 256
• Notes on using the configuration definition file, page 262
HORCM_INSTP parameter description format
Use the HORCM_INSTP parameter to specify the machine information and path group ID of the remote
host.
• dev_group
Specify the contents specified for dev_group of the HORCM_DEV parameter or HORCM_LDEV
parameter.
• You cannot specify ip_address more than once for the same host for a single dev_group.
• Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
• ip_address
Specify the IP address, the host name, NONE, or NONE6. If you specify NONE or NONE6, the local
host is assumed. If you use Replication Manager to add a new group to the existing configuration
definition file, this item will always be specified using the host name.
• Specify the information for the host managed by the Device Manager server.
• Match the IP address version (IPv6 or IPv4) to the one specified for HORCM_MON.
• When an IPv6 environment is being used, you cannot specify a host name. If you specify a
host name, an IPv4 environment is used.
• The table below lists the values that can be specified for ip_address. Note that some formats
cannot be specified for ip_address because they cannot identify a host.
Table 94 Values that can be specified for the ip_address of HORCM_INSTP parameter
Device Manager agent version
Value
7.6.0 or later
YesIP address
YesHost name
SometimesLoopback IP addresses (127.0.0.1 to 127.255.255.254)
Sometimes
Loopback host name (localhost)
NoCluster virtual IP address
NoCluster virtual machine name
Legend:
Yes: Can be specified.
Sometimes: Can be specified when the copy pair is managed from the Device Manager CLI.
However, this item cannot be specified when copy pair operations are performed from the
Device Manager GUI or Replication Manager.
No: Cannot be specified.
• service
Specify the port name or port number.
Using the Device Manager agent260