HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

2. Move to the directory that contains the installer (setup.sh).
The installer is located in the following location:
DVD-drive/AGENTS/HHDC/platform-name/
3. Execute the following command:
# ./setup.sh
4. Follow the instructions in the displayed messages.
When the installation is successful, the following message appears:
Host Data Collector installation completed successfully.
TIP:
You can also download the Host Data Collector installer from the Device Manager GUI.
NOTE:
If you performed an upgrade installation, you need to restart the services of the P9000 Command
View AE Suite product on the management server.
Related topics
• “Starting services” on page 195
• “Stopping services” on page 196
• Prerequisites for installing Host Data Collector , page 265
• Registering a Host Data Collector computer on the management server, page 269
Notes on using Host Data Collector
There are some points that you must note before using Host Data Collector.
If you attempt to register a Linux host that recognizes 256 or more LUNs in a storage system, the
attempt will fail with error message KAIC03006-E. If the OS of a host managed by Host Data Collector
is Linux, make sure that the LUs that the host recognizes does not exceed 256 per port. Also, make
sure that the LUNs are in the range from 0 to 255.
If Host Data Collector is in a cluster configuration, also note the following points:
• All nodes in the cluster must have the same disk configuration. The same Host Data Collector in-
stallation destination (drive name and path name) must be used.
• If you want to change the Host Data Collector settings after installation, specify the same settings
for all nodes.
• While the Host Data Collector service on the executing node is running, the Host Data Collector
service on the standby node must also be active.
Setting up Host Data Collector268