HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

Sequence in which attribute values are output
#1
Full name and con-
tent
Output character
string
<model name
#2
- serial name - port ID - domain ID - logical
device number
#4
>, name, port ID, domain ID of host group
or iSCSI target, name of the host group or iSCSI target to
be operated on, SCSI ID, LUN assigned to the path between
the host and host group , device number for logical unit
identification
#4
, port ID of the host group or iSCSI target to
be operated on, ID of the host group or iSCSI target to be
operated on, nickname of the host group or iSCSI target to
be operated on, operation target device number
#4
Path
(Information about the
path between the host
and host group )
Path
<model
#2
- serialnum - portID - domainID - devnum
#4
>,
name, portID, domainID, domainNickname, scsiID, lun,
devNum
#4
, targetPortID, targetDomainID, targetDomain-
Nickname, targetDevNum
#4
<model name
#2
- serial number - PDEV ID>, drive type,
drive size, form factor
PDEV
(Information about
PDEV)
PDEV
<model
#2
- serialnum - PDEVID>, diskType, diskModelSize,
formFactor
<model name
#2
- serial number - port ID>, Fibre Channel
port address, Fibre Channel topology, availability of LUN
security for an iSCSI port, iSCSI port options, channel speed,
SCSI port IP address, port subnet mask, iSCSI port gateway
IP address, iSCSI port number, keep alive time, iSCSI port
attribute, IPv6 status, link-local address setting type, link-
local address, global address setting type, global address
1, global address 2, IPv6 gateway address, MTU settings,
VLAN status, VLAN ID
Port
(Information about the
port)
Port
<model
#2
- serialnum - portID>, fibreAddress, topology,
lunSecurityEnabled, portOption, channelSpeed, ipAddress,
subnetMask, gateway, portNumber, keepAliveTime,
portRole, ipv6SettingMode, linklocalSettingMode, link-
localAddress, globalSettingMode, globalAddress1, global-
Address2, gatewayForIPv6, mtu, vlanSettingMode, vlanId
<model-name
#2
- serial number - port controller ID>, mode
PortController
(Information about the
port controller of the
storage system)
PortCtrl
<model
#2
- serialnum - controllerID>, mode
Name of the parameter for the method to be executed, the
type of the value specified by this parameter, the value
specified by the parameter
Param
(Element for specifying
the parameter for the
method specified by
CIMInvoker)
Prm
name, type, value
--
RelatedDistributedAr-
rayGroup
RDArrGrp
Troubleshooting324