HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

System configuration for using an SVP configuration to manage copy pairs (when copy pairs
are defined as a device group)
Set up the management server, hosts (application servers), and storage system so that the prerequisites
are satisfied.
Figure 22 Example of a system configuration for managing copy pairs (when copy pairs are defined
as a device group)
Management server conditions:
• The following computers must be registered as the Device Manager management resources:
- A host that recognizes the P-VOL
- A host that recognizes the S-VOL
• Device Manager agent version 7.1 or later must be installed on the management server.
• RAID Manager version 01-25-03/01 or later must be installed on the management server.
• The Replication Manager server and the Device Manager server can communicate using SSL.
• Either of the conditions below is satisfied on the management server.
- Neither the P-VOL nor S-VOL is assigned.
If you want to create a copy pair from the management server, specify enable for the
server.agent.rm.centralizePairConfiguration property of the Device Manager
agent on the management server (default: disable).
- The server.agent.rm.ignorePairStatus property for the Device Manager agent on
the management server must be set to true.
If you want to check the latest copy pair information by using the Device Manager GUI or
CLI, refresh the storage systems by using the following methods:
System configuration and requirements68