HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

Network settings for using the management server as a network

bridge

To use the management server as a network bridge by installing multiple network interface cards

(NICs) on the server, set up the networks so that the management server, management client, and

storage systems can mutually communicate.

The sections where settings must be specified are explained by using the configuration example shown

below.

Figure 23 Example of a configuration in which the management server is used as a bridge between

networks

Set up the routers, the management client, and the management server so that the devices can mutually

communicate as indicated by the arrows in the above figure.

• Storage system and the management client

• Storage system and the management server

CAUTION:

An IP address on the network to which the management client is connected (10.0.0.100 in Figure

23) must be specified for the P9000 Command View AE Suite product settings below. Do not specify

a host name.

• The setting for the computer on which the Device Manager Web server function is running (the

server.http.host property)