HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide (Web Version)

3. Delete the heading hash mark (#) from the #Listen [::]:port-number line to enable
IPv6-based communication.
For example, in the httpsd.conf file configured for SSL communication, the location of the
line from which you delete a hash mark (#) is shown below.
CAUTION:
• If you use non-SSL communication, you do not need to delete the hash mark (#) from
the Listen line under SSLSessionCacheSize.
• By default, all IPv6 addresses are set to allow communication.
• Specify the same port number as specified in the Listen line for IPv4.
• Do not delete or edit the Listen line. If you do so, communication via IPv4 will no
longer be possible in the environment.
4. Start the P9000 Command View AE Suite product services.
Related topics
• Starting services, page 195
• Stopping services, page 196
Settings for linking with storage systems that support IPv6
To operate XP24000/XP20000 storage systems that are managed using IPv6 addresses from Element
Manager, edit the server.properties file on the Device Manager server.
To link with storage systems that support IPv6:
• On the Device Manager server, open the server.properties file, and set either of the
following items for the server.http.host property:
• The IPv6 address of the computer on which the Device Manager server is installed
• The host name of the computer on which the Device Manager server is installed
The host name must be resolvable to the IPv6 address.
CAUTION:
If XP24000/XP20000 storage system or XP12000/XP10000/SVS200 storage system that
is managed via an IPv4 address is also set up as a Device Manager management-target,
IPv4 addresses must also be set for any NICs that have IPv6 addresses specified for the
server.http.host property.
Network configuration98