HP StorageWorks P9000 for Business Continuity Manager Software Installation Guide (T5253-96052, May 2011)

Table 3 Prerequisite Programs (continued)
DescriptionOverviewRequired / OptionalProgram Name
Use version 6.1.An optional product bundled
with WebSphere
Application Server for
z/OS. This is required to
establish IPv6 connections or
HTTPS communication with
P9000 Replication
Manager. In addition, z/OS
Security Level3 is required
when establishing HTTPS
communication with
Replication Manager.
OptionalIBM HTTP Server for z/OS
Use version 4.1.1.This program is required to
perform operations in 2DC
configurations with
HyperSwap.
OptionalIBM Tivoli Storage
Productivity Center for
Replication for System z
1 In the TSO/E terminal, lowercase letters might not be correctly displayed, depending on the usage environment.
Supported Storage Systems
Business Continuity Manager can be used to operate any of the following HP storage systems:
• HP StorageWorks XP1024/XP128 Disk Array
• HP StorageWorks XP12000/XP10000 Disk Array
• HP StorageWorks XP24000/XP20000 Disk Array
• HP StorageWorks P9500 Disk Array
Table 4 Generic Names Used in this Manual
Generic nameHP Storage System
XP1024/XP128XP1024/XP128 Disk Array
XP12000HP StorageWorks XP12000 Disk Array and HP
StorageWorks XP10000 Disk Array
XP24000HP StorageWorks XP24000 Disk Array and HP
StorageWorks XP20000 Disk Array
P9500HP StorageWorks P9500 Disk Array
The optional device configuration, shown in Figure 1 (page 12), is optional depending on whether
Replication monitor will be used or not. This management station is not required.
Prerequisite Conditions 11