HP StorageWorks P9000 for Business Continuity Manager Software Installation Guide (T5253-96052, May 2011)

4. Create space for the datasets to be transferred (execute the edited ALLOUPLD job).
The ALLOUPLD job creates the sequential dataset space for transferring the Business Continuity
Manager object archive and the REXX alternate library archive to the host machine.
For examples of modifying sample JCL (ALLOUPLD), see “ALLOUPLD (Creating Transmission
Datasets)” (page 88).
5. From the computer, transfer in binary mode the Business Continuity Manager object archive
and the REXX alternate library archive to the transfer dataset space allocated on the host
machine.
You need to transfer the REXX alternate library archive only if you plan to install a REXX
alternate library. However, you do not need to transfer the REXX alternate library archive to
the host machine if you are using z/OS V1R9 or later, because the REXX alternate library is
provided in the standard installation.
For details about the archive files to be transmitted, see “Files Provided on Installation CD-ROM”
(page 16).
6. Perform TSO/E RECEIVE processing (execute the edited RECVUPLD job).
Execute the RECVUPLD job modified in accordance with the installation environment, and
extract the data set provided from the archives transmitted in step 5.
For examples of modifying sample JCL (RECVUPLD), see “RECVUPLD (TSO/E RECEIVE
Processing)” (page 90).
Business Continuity Manager is ready to be installed using SMP/E as described in “Installing
Business Continuity Manager with SMP/E” (page 22), or by the simple installation as described
in “Simple Installation (Without SMP/E) Installation” (page 23).
Installing Business Continuity Manager
Business Continuity Manager installation involves multiple steps. Use SMP/E or simple installation
from a tape or CD-ROM to complete the installation.
Installing Business Continuity Manager with SMP/E
These sample JCL library members that are installed with SMP/E are modified with respect to the
user installation environment. Details are shown at the beginning of each sample JCL. For
modification examples, see “Modifying Sample JCL” (page 88).
The sample jobs are included as follows:
• When installed from the installation tape
The sample JCL is stored in a dataset at the destination for the copy operation described in
section “Preparations for Installing Business Continuity Manager from a Tape” (page 20).
• When installed from CD-ROM.
The sample JCL is stored in the HP.CHYLnnn.F1 dataset (the nnn portion varies depending
on the version) after tasks in “Preparations for Installing Business Continuity Manager from a
Tape” (page 20) are performed. If you change the RECVUPLD job and the output destination
dataset name for the TSO/E RECEIVE command, the sample JCL is stored in the dataset after
the changes.
JCL member names and their functions are listed below. To install the Business Continuity Manager
product with SMP/E, execute the sample jobs below in the following order:
22 Installing Business Continuity Manager