HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DescriptionItem
The event notification address
notifyToURL
The description of the task
description
Legend:
[ ]: Indicates output only when either the -d or the --detail option is specified.
The output items described in Table 74, Table 75, and Table 76 below are output only if the -d or
--detail option is specified.
Table 74 Items output by the GetTasks command (external mapping task) (ErrorInfo instance)
DescriptionItem
The error message
message
Table 75 Items output by the GetTasks command (external mapping task) (ExternalMappingInfo
instance)
DescriptionItem
The logical device number of the storage system.
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:).
deviceNumber
The parity group name of the volume
arrayGroupName
The serial number on the external storage system side
externalSubsystem-
SerialNumber
The display model name on the external storage system side
externalSubsystem-
DisplayModel
The storage system name as viewed from the external storage system
externalSubsystem-
Name
The vendor name on the external storage system side
externalSubsystem-
Vendor
The logical device number of the LU on the external storage system side.
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:).
externalDeviceNum-
ber
The logical device ID of the LU on the external storage system side.
For the HP storage system, - is displayed.
externalDeviceID
The parity group name on the external storage system side
externalArrayGroup-
Name
The path group ID when a volume is externally connected
pathGroupID
The volume capacity in KB. Only the value is displayed.
capacityInKB
The status of the external mapping task for each volume
For details on the values displayed, see “Task statuses” on page 177.
status
CLI Reference Guide 137