HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

Command execution result
RESPONSE
An instance of Host
objectID=*****
name=snow
hostID=1
ipAddress=172.18.32.9
capacityInKB=0
hostType=3
managedBy=-1
osType=VMware
statusOfDBUpdating=0
List of 2 WWN elements:
An instance of WWN
WWN=12.34.56.78.90.AB.CD.EF
An instance of WWN
WWN=01.23.45.67.89.AB.CD.EF
*****: The value is encoded by the CLI.
ModifyHostInfo
ModifyHostInfo modifies a HostInfo record in the Device Manager server.
NOTE:
This command does not support virtualization servers.
Parameters
Table 103 ModifyHostInfo command parameters
DescriptionStatusParameter name
Object ID of the HostInfo record to modify
Specify the object ID obtained from another CLI response. The
value is encoded by the CLI.
Required
objectid
New serial number of the path's storage system
Omit this when no change is required.
Optional
serialnum
New model of the path's storage system
Omit this when no change is required.
Optional
model
New name of the HostInfo
Omit this when no change is required.
You can use a character string of 1-50 bytes for the name.
Optional
hostname
New IPv4 IP address of the host
Omit this parameter if you are not changing the IPv4 IP address
of the host.
Optional
ipaddress
Command reference310