HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionStatusParameter name
New IPv6 IP address of the host
Omit this parameter if you are not changing the IPv6 IP address
of the host.
Optional
ipv6address
New mount point on the host file system corresponding to the
path
Omit this when no change is required.
Optional
mountpoint
New port on the path
Omit this when no change is required.
When this is changed, port or portname must be specified.
Do not specify both parameters at the same time. If they are
specified at the same time, an error occurs.
Optional
port
New port name of the path
Omit this when no change is required.
When this is changed, port or portname must be specified.
Do not specify both parameters at the same time. If they are
specified at the same time, an error occurs.
Optional
portname
New domain ID of the path
Omit this when no change is required.
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Optional
domain
New device number of the path
Omit this when no change is required.
For P9500 and XP24000/XP20000:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format ww:xx:yy, where
ww is the LDKC number, xx is the CU number, and yy is the
LDEV number. ww is optional. If ww is omitted, LDKC is as-
sumed to be 0.
For XP12000/XP10000/SVS200 and XP1024/XP128:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format xx:yy, where xx is
the CU number, and yy is the LDEV number.
The execution results are output in decimal.
Optional
devnum
New Port WWN on the host bus adapter
Omit this when no change is required.
Optional
portwwn
New type of the file system
Omit this when no change is required.
Optional
filetype
New name of the file system
Omit this when no change is required.
Optional
filename
CLI Reference Guide 311