HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

[pvolportid=port-number|pvolportname=port-name]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number] [fencelevel=fence-level]
[copytracksize=copy-pace] [pairoption=suspend]
• Method 3: Create a new RAID Manager configuration definition file, creates a copy group, then
adds a copy pair to the copy group. To use this method, execute the command in the following
format:
hdvmcli [URL] AddReplication [options]
[groupname=group-name]
pvolhostid=host-ID [pvolinstancenum=instance-number]
pvolportnum=port-number
svolhostid=host-ID [svolinstancenum=instance-number]
svolportnum=port-number
pvolarraytype=model pvolserialnum=serial-number
pvoldevnum=device-number
[pvolportid=port-number|pvolportname=port-name]]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number] [fencelevel=fence-level]
[copytracksize=copy-pace] [pairoption=suspend]
Parameters
Table 113 AddReplication command parameters
DescriptionStatusParameter name
Copy group number
If you are using method 1, you must specify this parameter.
If you are using method 2 or 3, do not specify this parameter. If
you specify this parameter, method 1 is applied.
Optional
replication-
groupid
Group name used in the RAID Manager
Use a maximum of 31 bytes for a group name. The group name
cannot begin with a hash mark (#) or a hyphen (-).
For details about the characters that can be used in group names,
follow the rules for RAID Manager.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
groupname
CLI Reference Guide 339