HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-02 Release Notes (TB581-96399, March 2014)

In the GUI or the CLI, this issue occurs when all of the following conditions are met:
• Virtualize Volumes dialog box
Capacity of selected volume from which the dialog box is launched is greater than 4,194,304
MB (4.0 TB), or a capacity that is greater than 4,194,304 MB (4.0 TB) is specified in the
dialog box that is launched with selecting no volumes.
◦
◦ An XP P9500 is selected for internal storage system.
• CLI AddExternalArrayGroup command
XP P9500 is specified for the model parameter.◦
◦ create is specified for the luoption parameter.
◦ Volume capacity of external storage system specified for the externallun parameter is
greater than 4,294,967,296 KB (4.0 TB).
◦ The capacity parameter is omitted or is specified for a volume capacity that is greater than
4,294,967,296 KB (4.0 TB).
If this occurs, virtualize a volume using Element Manager.
Creating a Smart pool in XP P9500
In the Create Pool dialog box, if operations for creating a Smart pool meet all of the following conditions,
creating the Smart pool may generate the KAIC07861-E error indicating that the cycle time is invalid:
• An XP P9500 whose microcode version is earlier than 70-02-00-00/00 is selected in the Storage
System box.
• Smart is selected as pool type.
• Auto is selected as tier management of Smart Options.
If this occurs, select 24 hours in the Cycle time box, and then select the Show Plan button.
Values displayed in Removable column of pool volume list
If Yes appears in the Removable column of the pool volume list, removing pool volume in shrink pool
process may not succeed under any of the following conditions.
• The pool usage rate has exceeded the Depletion Threshold, or the pool status is blocked.
• The pool volume status is blocked.
• If the pool volume is removed, the pool usage rate exceeds Depletion Threshold, or the pool
subscription rate exceeds Subscription Limit.
CIM/WBEM function property deleted at overwrite installation
When Device Manager is installed with overwrite installation, the following property is deleted in the
property file jserver.properties.
Before you install Device Manager with overwrite installation, the file needs to be saved at another
location. After overwrite installation, update the property file by using the saved file.
Property name: com.wbemsolutions.jserver.bindto
Properties file name: jserver.properties
26 Important considerations