HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Description
Displays information about RAID Groups of the array such as the RAID level, ACP pair, control unit,
and disk mechanics information.
Switches
Required. Specify the array serial number.–dkc <serial #>
Required. Specify the RAID Group for which you want output displayed.–rg <raid group>
Specify the address of a management station in the format <http://path.to.manage-
mentstation:<port>> or <https://path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password
file>
Specify the delimiter for the delimited output.–d <char>
Displays data in a readable format.–hr
Prints the usage statement.–?
Examples
raidgrp -dkc 30143 -rg 1-1 –hr
raidgrp -dkc 10055 -rg 1-1 –L
raidgrp -dkc 127 -rg 1-1
raidgrp -dkc 10055 -rg “1-5 1-6”
NOTE:
When using the RAIDGRP command on concatenated RAID Groups, the RAID Groups must be in
double quotes.
EVNTLOG
Syntax
evntlog [-auth <user:passwd>] [-ms <URL>] [-L] [-d<char>] [-hr] [-?]
[-type <type ID>] [-sev <severity>] [-st <mm.dd.yyyy hh:mm:ss>] [-et
<mm.dd.yyyy hh:mm:ss>]
Supported disk array types
XP and P9000 disk arrays
CLUI commands36