HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Specify the time and date of the last stored data collection. Cannot be used with -loglvl

or -list.

–et <mm.dd.yyyy

hh:mm:ss>

Specify the address of a management station in the format <http://path.to.man-

agementstation:<port>> or <https://path.to.managementstation>.

–ms <URL>

Specify a user name and password pair in the format user name:password.

–auth <user:pass-

wd>

Can be used in place of –auth.

NOTE:

The password file must be created using the encrypt command only.

–pf

Specify the delimiter for delimited display.–d <char>

Displays column headers with the delimiter.–L

Displays data in a readable format.–hr

Prints the usage statement.–?

Examples

dbconfig -list –hr

dbconfig -list -L

dbconfig –list

AGGREGATE

Syntax

aggregate [-items <item list>] [-L] [-hr] [-a] [-st<MM.DD.YYYY hh:mm:ss>]

[-et<MM.DD.YYYY hh:mm:ss>] [-?]

The format to list items for the P9000 Thin Provisioning metrics for the aggregate command is:

<array_sl_no>:<THP Pool ID>

The format to list items for the P9000 Snapshot metrics for the aggregate command is:

<array_sl_no>:<Snapshot Pool ID>

The format to list the average and maximum values for the samples in the time period specified by

the –st and –et values is as follows:

aggregate [-a] [-st<MM.DD.YYYY hh:mm:ss>] [-et<MM.DD.YYYY hh:mm:ss>]

Supported disk array types

XP and P9000 disk arrays

CLUI commands40