HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Specify the start time in the format mm.dd.yyyy hh:mm:ss.

–st <mm.dd.yyyy

hh:mm:ss>

Specify the end time in the format mm.dd.yyyy hh:mm:ss.

–et <mm.dd.yyyy

hh:mm:ss>

Specify the address of a management station in the format <http://path.to.man-

agementstation:<port>> or <https://path.to.managementstation>.

–ms <URL>

Specify a user name and password pair in the format user name:password.

–auth <user:pass-

wd>

Can be used in place of –auth.

NOTE:

The password file must be created using the encrypt command only.

–pf <password

file>

Specify the delimiter for delimited display.–d<delim>

Display column headers with delimited data.–L

Displays data in a human readable format.–hr

Prints this usage statement.–?

NOTE:

The -st and –et options are supported with the –jid option only.

Examples

jnl -hr -dkc 10001

jnl -hr -dkc 10001 -jid 0

jnl -hr -dkc 10001 -jid 0 -st 4.5.2007 03:00:00 -et 4.5.2007 03:10:00

-resp

EXPORTDB

Syntax

exportdb [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] [-st

<mm.dd.yyyy hh:mm:ss>] [-et <mm.dd.yyyy hh:mm:ss>] [-file <filename>]

-dkc <serial #> -dver <XXXXXX> [-?]

Supported disk array types

XP and P9000 disk arrays

CLUI commands52